Erratum
Statement of Confirmation
Technical Clarification Number
MAT11-E-OB1-0919
Guidance
2015-05-26
The documentation requirement 'Statement of Confirmation' can be deleted as a requirement for Design submissions, because at this stage of a project specific material suppliers are often not selected.
------------------------------------------------------------------------------------------------------------
Technical Clarification
Revised Mat-11 credit incorporating all TC's, CIR's and Erratum's to date
Technical Clarification Number
MAT11-T-OB1-0439
Guidance
2012-12-04
The revised MAT-11 Local Sourcing credit includes preceding technical clarifications, credit interpretations requests and erratum's.
Please find the revised credit below:
Supplementary Information
SEE ATTACHMENT BELOW TC MAT11-T-OB1-0439
Technical Clarification
Point of recovery and manufacture for steel products
Technical Clarification Number
MAT11-T-OB1-0571
Guidance
2012-09-13
For the purpose of Green Star SA the scrap dealer or salvage yard is identified as the location from where the material was salvaged or recovered, the point of recovery. It is not required for the scrap dealer or salvage yard to provide information of where each piece of material which has been purchased from them, has been collected.
The foundry purchasing the salvaged or recovered material from the scrap dealer or salvage yard is considered as the point of manufacture and only that fraction of the material bought from the scrap dealer or salvage yard shall contribute to the value of that material for consideration in the local sourcing credit.
Erratum
Green Star SA - Office v1 Technical Manual: Page 268 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0536
Guidance
2012-07-04
Technical Clarification
Local Sourcing – Fill material / bulk earthworks (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0500
Guidance
2012-05-29
Erratum
Green Star SA - Office v1 Technical Manual: Page 267-268 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0400
Guidance
2012-01-26
Technical Clarification
Quantity surveyor report and short report
Technical Clarification Number
MAT11-T-OB1-0357
Guidance
2012-01-06
This Technical Clarification is applicable to Mat-3 Reused Materials, Mat-6 Steel, Mat-7 PVC Minimisation, Mat-8 Sustainable Timber, Mat-9 Design for Disassembly, Mat-10 Dematerialisation and Mat-11 Local Sourcing.
Where the ‘Documentation Requirements’ (for Design and As Built) request a ‘Short report’ and a ‘Quantity Surveyor report’, if the ‘Short report’ is prepared by the Quantity Surveyor, it is permitted that one consolidated report satisfying both ‘Documentation Requirements’ be submitted instead of two separate documents.
Where the ‘Short report’ is not prepared by the Quantity Surveyor (e.g. green building consultant, Accredited Professional, structural engineer etc.), both the ‘Short report’ and ‘Quantity Surveyor report’ must be submitted independently.
The purpose of the ‘Quantity Surveyor report’ is to validate data (e.g. quantities, costs, Project’s contract value etc.) referenced within the ‘Short report’.
Technical Clarification
Calculations - exclusions (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0346
Guidance
2011-11-11
Erratum
Green Star SA - Office v1 Technical Manual: Page 267 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0180
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 267 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0181
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 268 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0182
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 267 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0183
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 267 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0184
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 267 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0185
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 267 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0186
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 268 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0187
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 268 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0188
Guidance
2011-01-06
Erratum
Green Star SA - Office v1 Technical Manual: Page 268 (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Erratum Number
MAT11-E-OB1-0189
Guidance
2011-01-06
Technical Clarification
Documentation - short report (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0092
Guidance
2010-08-03
Technical Clarification
Documentation - specifications (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0075
Guidance
2010-05-28
Technical Clarification
Documentation - short report (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0074
Guidance
2010-05-27
Technical Clarification
Documentation - amendments (As Built) (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0073
Guidance
2010-05-26
Technical Clarification
Documentation - amendments (Design) (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0072
Guidance
2010-05-25
Technical Clarification
Documentation CORRECTION (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0038
Guidance
2009-06-05
Technical Clarification
Calculations (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0020
Guidance
2009-02-06
Technical Clarification
Partial local products (SUPERCEDED by MAT11-T-OB1-0439 issued on 2012-12-04)
Technical Clarification Number
MAT11-T-OB1-0007
Guidance
2009-02-05
Comments