Follow

IEQ-6 HIGH FREQUENCY BALLASTS

 

Technical Clarification

High Frequency Ballasts and 'Shell & Core' spaces

Technical Clarification Number
IEQ6-T-OB1-0360

Guidance
2012-01-10

The following guidance is provided for spaces delivered as ‘Shell & Core’, as defined in the Green Star SA Office v1 Technical Manual.

For spaces delivered as ‘Shell & Core’, where no luminaires are provided, as evidenced through the provision of a fully documented design within the tender documentation (Design rating) or as installed As Built documentation and commissioning reports (As Built rating), compliance with the Credit Criteria cannot be demonstrated.

 

Technical Clarification

High frequency ballasts credit clarification

Technical Clarification Number
IEQ6-T-OB1-0303

Guidance
2011-11-08

Where it is clearly demonstrated within the extract(s) from specification(s) that ALL ballasts installed in fluorescent luminaires serving the office UA must be high frequency, within the ‘Short Report’ it is not necessary to show “the UA served by luminaires with high frequency ballasts” nor provide “a summary table or calculations showing that the areas served by luminaires with high frequency ballasts jointly account for at least 95% of the total UA”. These may be excluded from the ‘Documentation Requirements’ of the Green Star SA Office v1 Technical Manual.

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk