Follow

IEQ-10 INDIVIDUAL THERMAL COMFORT

 

Technical Clarification

Individual comfort control and 'Shell & Core' spaces

Technical Clarification Number
IEQ10-T-OB1-0363

Guidance
2012-01-10

The following guidance is provided for spaces delivered as ‘Shell & Core’, as defined in the Green Star SA Office v1 Technical Manual.

The individual thermal comfort control within a mechanically ventilated space is highly influenced by the design of the HVAC system within the space. Where a mechanically ventilated space is not provided with a complete HVAC system, as evidenced through the provision of a fully documented design within the tender documentation (Design rating) or as installed As Built documentation and commissioning reports (As Built rating), compliance with the Credit Criteria cannot be demonstrated.

 

Erratum

Green Star SA - Office v1 Technical Manual: Page 91

Erratum Number
IEQ10-E-OB1-0129

Guidance
2011-01-06

Credit Criteria, for both naturally ventilated and mechanically ventilated options, both bullet points, change "user controls are provided every 30m2 [or 15m2] of the UA" to "user controls are provided every 30m2 [or 15m2] for 90% of the UA".

 

Technical Clarification

UA percentage - correction

Technical Clarification Number
IEQ10-T-OB1-0076

Guidance
2010-05-31

The requirement to provide user controls for every 30m2 or 15m2 for this credit has been modified. For both naturally ventilated and mechanically ventilated spaces, the bullet points of the credit criteria which state "user controls are provided every 30m2 [or 15m2] of the UA" should be changed to "user controls are provided every 30m2 [or 15m2] for 90% of the UA". This change accounts for case where tenants will install within the UA storerooms, toilet rooms, eT., which do not need controls.

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk