Follow

EMI-4 INSULANT ODP

 

Technical Clarification

Non-site applied insulation. This TC replaces TC EMI4-T-OB1-0458 issued on 25-02-2013

Technical Clarification Number
EMI4-T-OB1-0794

Guidance
2014-05-26

The credit aims to encourage and recognise the selection of insulants that do not contribute to long term damage to the Earth’s stratospheric ozone layer. The credit looks therefore at the insulation of building services and building fabric and thus includes all applicable services such as mechanical, electrical, fire and hydraulics.

Project teams must thus demonstrate that the specification of thermal insulation in any of the above services avoids the use of ODP substances in both its manufacture and composition for both on-site and off-site applications.

Documentation requirements, As Built table, add bullet point “Statement of confirmation (2)”
Statement of confirmation (2) from supplier(s) confirming that all of the insulants used are free from ozone-depleting substances in both manufacture and composition. The supplier(s) must identify (with supporting evidence such as Manufacturer’s Data sheet) the type and properties of the insulants used.
Note: These offsite applications include but are not limited to:
• Hot water cylinders
• Chillers

 

Technical Clarification

Non-site applied insulation

Technical Clarification Number
EMI4-T-OB1-0458

Guidance
2013-02-25

The credit aims to encourage and recognise the selection of insulants that do not contribute to long term damage to the Earth’s stratospheric ozone layer. The credit looks therefore at the insulation of building services and building fabric and thus includes all applicable services such as mechanical, electrical, fire and hydraulics.

Project teams must thus demonstrate that the specification of thermal insulation in any of the above services avoids the use of ODP substances in both its manufacture and composition for both on-site and off-site applications.

Documentation requirements, As Built table, add bullet point “Statement of confirmation”
Statement of confirmation from supplier(s) confirming that all of the insulants used are free from ozone-depleting substances in both manufacture and composition. The supplier(s) must identify (with supporting evidence such as Manufacturer’s Data sheet) the type and properties of the insulants used.
Note: These offsite applications include but are not limited to
• Hot water cylinders
• Chillers

 

Technical Clarification

Fibre-based woven insulation products

Technical Clarification Number
EMI4-T-OB1-0328

Guidance
2012-01-23

Fibre-based woven insulation products (e.g. glass fibre, mineral wool, polyester etc.) and foil insulation are not within the scope of the Credit Criteria as these products are not manufactured using blowing agents. As such, manufacturer product datasheets are not required for fibre-based woven insulation nor foil insulation products.

 

Erratum

Green Star SA - Office v1 Technical Manual: Page 321

Erratum Number
EMI4-E-OB1-0127

Guidance
2011-01-06

Documentation Requirements, description of documents, "Summary Sheet" description, change "inulation" to "insulation".

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk