Follow

EMI-11 ATMOSPHERIC DETERIORATION AVOIDANCE

 

Erratum

Page 396 Documentation Requirements, description of documents, under ‘Short Report’, delete the words “and mass” in the 1st bullet point. This supercedes EMI1-E-OB1-745

Erratum Number
EMI11-E-PB1-0864

Guidance
2015-04-22

Delete the words “and mass” in the 1st bullet point. This erratum supercedes EMI1-E-OB1-745

 

Technical Clarification

Non-site applied insulation

Technical Clarification Number
EMI11-T-PB1-0458

Guidance
2013-02-25

The credit aims to encourage and recognise the selection of insulants that do not contribute to long term damage to the Earth’s stratospheric ozone layer. The credit looks therefore at the insulation of building services and building fabric and thus includes all applicable services such as mechanical, electrical, fire and hydraulics.

Project teams must thus demonstrate that the specification of thermal insulation in any of the above services avoids the use of ODP substances in both its manufacture and composition for both on-site and off-site applications.

Documentation requirements, add bullet point “Statement of confirmation”
Statement of confirmation from supplier(s) confirming that all of the insulants used are free from ozone-depleting substances in both manufacture and composition. The supplier(s) must identify (with supporting evidence such as Manufacturer’s Data sheet) the type and properties of the insulants used.
Note: These offsite applications include but are not limited to
• Hot water cylinders
• Chillers

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk